PRODUCTS CATALOGUE

• PARKING JACKS DIVISION
  • PARKING AND WHEEL JACKS
    • PARKING JACK "HEAVY" TYPE
    • PARKING JACK "NORMAL" TYPE
    • WHEEL JACK WITH SPRING TURNOVER AND RUBBER WHEEL
    • PARKING JACK "LIGHT" TYPE
    • PARKING JACK "HEAVY" TYPE WITHOUT FOOTPLATE
    • WHEEL JACK WITH SPRING TURNOVER AND STEEL WHEEL
    • WHEEL JACK WITH PIN TURNOVER
    • WHEEL JACK WITH PIN TURNOVER "HEAVY TYPE
    • WHEEL JACK WITH PIN TURNOVER "HEAVY TYPE AND LATERAL HANDLE
    • WHEEL JACK WITH AUTOMATIC TURNOVER
    • WHEEL JACK WITHOUT TURNOVER "RUBBER WHEEL"
    • WHEEL JACK WITHOUT TURNOVER "STEEL WHEEL"
    • WHEEL JACK WITH TURNOVER AND LATERAL HANDLE
    • WHEEL JACK WITH TURNOVER AND UPPER HANDLE
    • DEPTH CONTROL WHEEL JACK FOR LAND-MACHINES ("B" VERSION)
    • DEPTH CONTROL WHEEL JACK FOR LAND-MACHINES ("A" VERSION)
    • LATERAL WHEEL JACK FOR LAND-MACHINES
  • PARLING JACK WITH REDUCTION GEAR
    • SWIVEL PARKING JACK WITH LATERAL HANDLE
    • PARKING JACK WITH LATERAL HANDLE
    • PARKING JACK WITH REDUCTION GEAR AND LATERAL HANDLE
    • PARKING JACK "HEAVY TYPE" WITH REDUCTION GEAR AND LATERAL HANDLE
    • PARKING JACK "NORMAL TYPE" WITH REDUCTION GEAR AND LATERAL HANDLE
    • PARKING JACK "HEAVY TYPE" WITH TWO EXTENSION, REDUCTION GEAR AND LATERAL HANDLE
    • PARKING JACK WITH REDUCTION GEAR AND UPPER HANDLE
    • PARKING JACK WITH REDUCTION GEAR AND UPPER EXTRACTABLE HANDLETYPE
    • PARKING JACK WITH TWO EXTENSONS, REDUCTION GEAR AND UPPER HANDLE
    • PARKING JACK WITH TWO EXTENSIONS, REDUCTION GEAR AND UPPER EXTRACTABLE HANDLETYPE
    • CRICK JACK "L" TYPE
    • CRICK JACK "N" TYPE
    • CRICK JACK "N" TYPE (HEAVY VERSION)
    • CRICK JACK "VE" TYPE (HELICAL SCREW)
  • HYDRAULIC JACKS
    • HYDRAULIC JACK "PIPPO" WITH SAFETY VALVE (FIXED FOOTPLATE)
    • HYDRAULIC JACK "PIPPO" WITH SAFETY VALVE (ARTICULATED FOOTPLATE)
  • PARKING JACKS SPARE PARTS
    • TRAPEZOIDAL SCREW
    • NUT FOR TRAPEZOIDAL SCREW
  • VARIATION ON PARKING JACKS
    • LINEAR MANUAL ACTUATOR
    • ROUND REGISTER LEVER
    • SQUARE REGISTER LEVER
    • GALVANIZED PARKING JACK WITH LATERAL CONNECTION
    • DETAIL LATERAL SQUARE HANDLE
    • DETAIL LATERAL HEXAGONAL HANDLE
    • DETAIL ARTICULATED FOOTPLATE
    • DETAIL DETACHABLE FOOTPLATE
  • LANDING GEARS FOR SEMI-TRAILERS
    • LANDING GEARS DESCRIPTION
    • FOOT TYPE AND HANDLES CHOICE
    • CROSS SHAFT AND MOUNTING PLATES
    • LANDING GEARS TYPE "20TC"
    • LANDING GEARS TYPE "20TC/G"
    • LANDING GEARS TYPE "20T"
    • LANDING GEARS WITH TWO EXTENSIONS
    • LANDING GEARS TYPE "20TC HEAVY"
    • SPARE PARTS FOR LANDING GEARS
    • LANDING GEARS FOR SEMI-TRAILERS WITHOUT REDUCTION GEAR
    • LANDING GEARS FOR SHAFT ("A" VERSION)
    • LANDING GEARS FOR SHAFT ("B" VERSION)
    • LANDING GEARS FOR SHAFT ("C" VERSION)
    • LANDINING GEARS TYPE "20TCM/B"
    • LANDING GEARS WITH FIXED SUPPORT
  • STEEL WHEELS
    • STEEL WHEEL WITH AUTOLUBRIFICATING NYLON BUSHINGS
    • STEEL WHEEL WITH BEARING-HOLDER HUB
    • STEEL WHEEL WITH NYLON BUSHINGS AND CREST
    • STEEL WHEEL WITH BEARING-HOLDER HUB AND CREST
    • STEEL WHEEL WITH ASSEMBLED PIN
    • ROLLERS WITH NYLON BUSHING OR BEARING-HOLDER HUB "A" TYPE
    • ROLLERS WITH NYLON BUSHING OR BEARING-HOLDER HUB "B" TYPE
    • ROLLERS WITH NYLON BUSHING OR BEARING-HOLDER HUB "C" TYPE
    • ROLLERS WITH REINFORCED CLAMP
    • ROLLERS WITH NYLON BUSHING OR BEARING-HOLDER HUB "D" TYPE
    • GALVANIZED CUP FOR "MPC" WHEELS
    • DUST COVER FOR WHEELS
    • DUST COVER FOR WHEELS (EDGING HOLE)
    • NYLON SELFLUBRIFICATING BUSH
    • THRUST BEARING
    • RADIAL BEARING
• SLEWING RINGS DIVISION
  • INDUSTRIAL SLEWING RINGS
    • SLEWING RINGS "C.ZT" SERIES
    • SLEWING RINGS CZT D.418
    • SLEWING RINGS CZT D.518
    • SLEWING RINGS CZT D.648
    • SLEWING RINGS CZT D.748
    • SLEWING RINGS CZT D.848
    • SLEWING RINGS CZT D.948
    • SLEWING RINGS CZT D.1048
    • SLEWING RINGS CZT D.1198
    • SLEWING RINGS "C.ZP" SERIES
    • SLEWING RINGS CZP D.1100
    • SLEWING RINGS CZP D.1200
    • SLEWING RINGS CZP D.1300
    • SLEWING RINGS CZP D.1400
    • SLEWING RINGS CZP D.1500
    • SLEWING RINGS CZP D.1600
    • SLEWING RINGS "C.DI" SERIES
    • SLEWING RINGS CDI D.518
    • SLEWING RINGS CDI D.648
    • SLEWING RINGS CDI D.748
    • SLEWING RINGS CDI D.848
    • SLEWING RINGS CDI D.948
    • SLEWING RINGS CDI D.1048
    • SLEWING RINGS CDI D.1198
    • SLEWING RINGS "C.PI" SERIES
    • SLEWING RINGS CPI D. 1100
    • SLEWING RINGS CPI D. 1200
    • SLEWING RINGS CPI D. 1300
    • SLEWING RINGS CPI D. 1400
    • SLEWING RINGS CPI D. 1500
    • SLEWING RINGS CPI D. 1600
    • SLEWING RINGS "C.DE" SERIES
    • SLEWING RINGS CDE D.503,5
    • SLEWING RINGS CDE D.640,8
    • SLEWING RINGS CDE D.742,8
    • SLEWING RINGS CDE D.838,8
    • SLEWING RINGS CDE D.950,4
    • SLEWING RINGS CDE D.1046,4
    • SLEWING RINGS CDE D.1198,4
    • SLEWING RINGS "C.PE" SERIES
    • SLEWING RINGS CPE D.1098
    • SLEWING RINGS CPE D.1200
    • SLEWING RINGS CPE D.1300
    • SLEWING RINGS CPE D.1400
    • SLEWING RINGS CPE D.1500
    • SLEWING RINGS CPE D.1600
    • SLEWING RINGS "I.DE" SERIES
    • SLEWING RINGS IDE D.244
    • SLEWING RINGS IDE D.313,5
    • SLEWING RINGS IDE D.318
    • SLEWING RINGS IDE D.318,6
    • SLEWING RINGS IDE D.342
    • SLEWING RINGS IDE D.353,5
    • SLEWING RINGS IDE D.403,5
    • SLEWING RINGS IDE D.434
    • SLEWING RINGS IDE D.437,34
    • SLEWING RINGS IDE D.455,3
    • SLEWING RINGS IDE D.503,3
    • SLEWING RINGS IDE D.527,84
    • SLEWING RINGS IDE D.589,5
    • SLEWING RINGS IDE D.595
    • SLEWING RINGS IDE D.640,3
    • SLEWING RINGS IDE D.695
    • SLEWING RINGS IDE D.742,3
    • SLEWING RINGS IDE D.838,1
    • SLEWING RINGS IDE D.864
    • SLEWING RINGS IDE D.950,1
    • SLEWING RINGS IDE D.972
    • SLEWING RINGS IDE D.1046,1
    • SLEWING RINGS IDE D.1094
    • SLEWING RINGS IDE D.1144
    • SLEWING RINGS IDE D.1200
    • SLEWING RINGS IDE D.1218
    • SLEWING RINGS IDE D.1289,5
    • SLEWING RINGS IDE D.1358
    • SLEWING RINGS IDE D.1408
    • SLEWING RINGS IDE D.1432
    • SLEWING RINGS "2 I.DE" SERIES
    • SLEWING RINGS 2IDE D.420
    • SLEWING RINGS 2IDE D.430
    • SLEWING RINGS 2IDE D.432
    • SLEWING RINGS 2IDE D.492
    • SLEWING RINGS 2IDE D.504
    • SLEWING RINGS 2IDE D.595
    • SLEWING RINGS 2IDE D.695
    • SLEWING RINGS 2IDE D.831
    • SLEWING RINGS 2IDE D.864
    • SLEWING RINGS 2IDE D.1080
    • SLEWING RINGS 2IDE D.1144
    • SLEWING RINGS 2IDE D.1200
    • SLEWING RINGS 2IDE D.1218
    • SLEWING RINGS 2IDE D.1289,5
    • SLEWING RINGS 2IDE D.1379
    • SLEWING RINGS 2IDE D.1474
    • SLEWING RINGS 2IDE D.1476
    • SLEWING RINGS "I.DI" SERIES
    • SLEWING RINGS IDI D.320
    • SLEWING RINGS IDI D.340
    • SLEWING RINGS IDI D.385
    • SLEWING RINGS IDI D.410
    • SLEWING RINGS IDI D.458
    • SLEWING RINGS IDI D.458
    • SLEWING RINGS IDI D.458
    • SLEWING RINGS IDI D.486
    • SLEWING RINGS IDI D.535
    • SLEWING RINGS IDI D.570
    • SLEWING RINGS IDI D.595
    • SLEWING RINGS IDI D.595
    • SLEWING RINGS IDI D.616
    • SLEWING RINGS IDI D.635
    • SLEWING RINGS IDI D.642
    • SLEWING RINGS IDI D.650
    • SLEWING RINGS IDI D.716
    • SLEWING RINGS IDI D.750
    • SLEWING RINGS IDI D.816
    • SLEWING RINGS IDI D.848
    • SLEWING RINGS IDI D.850
    • SLEWING RINGS IDI D.855
    • SLEWING RINGS IDI D.910
    • SLEWING RINGS IDI D.916
    • SLEWING RINGS IDI D.950
    • SLEWING RINGS IDI D.955
    • SLEWING RINGS IDI D.1000
    • SLEWING RINGS IDI D.1015
    • SLEWING RINGS IDI D.1016
    • SLEWING RINGS IDI D.1049
    • SLEWING RINGS IDI D.1050
    • SLEWING RINGS IDI D.1055
    • SLEWING RINGS IDI D.1066
    • SLEWING RINGS IDI D.1155
    • SLEWING RINGS IDI D.1166
    • SLEWING RINGS IDI D.1255
    • SLEWING RINGS IDI D.1298
    • SLEWING RINGS IDI D.1355
    • SLEWING RINGS IDI D.1360
    • SLEWING RINGS IDI D.1390
    • SLEWING RINGS IDI D.1427
    • SLEWING RINGS IDI D.1455
    • SLEWING RINGS "2 I.DI" SERIES
    • SLEWING RINGS 2IDI D.360
    • SLEWING RINGS 2IDI D.570
    • SLEWING RINGS 2IDI D.705
    • SLEWING RINGS 2IDI D.950
    • SLEWING RINGS 2IDI D.1015
    • SLEWING RINGS 2IDI D.1172
    • CUSCINETTI DI BASE 2IDI D.1470
    • SLEWING RINGS 2IDI D.1530
    • SLEWING RINGS "C.SD" SERIES
    • SLEWING RINGS CSD D.300
    • SLEWING RINGS CSD D.302
    • SLEWING RINGS CSD D.329
    • SLEWING RINGS CSD D.356
    • SLEWING RINGS CSD D.388
    • SLEWING RINGS CSD D.390
    • SLEWING RINGS CSD D.403,5
    • SLEWING RINGS CSD D.440
    • SLEWING RINGS CSD D.455
    • SLEWING RINGS CSD D.475
    • SLEWING RINGS CSD D.486
    • SLEWING RINGS CSD D.486
    • SLEWING RINGS CSD D.558
    • SLEWING RINGS CSD D.616
    • SLEWING RINGS CSD D.625
    • SLEWING RINGS CSD D.626
    • SLEWING RINGS CSD D.695
    • SLEWING RINGS CSD D.712
    • SLEWING RINGS CSD D.716
    • SLEWING RINGS CSD D.748
    • SLEWING RINGS CSD D.800
    • SLEWING RINGS CSD D.816
    • SLEWING RINGS CSD D.900
    • SLEWING RINGS CSD D.900
    • SLEWING RINGS CSD D.916
    • SLEWING RINGS CSD D.1016
    • SLEWING RINGS CSD D.1130
    • SLEWING RINGS CSD D.1166
    • SLEWING RINGS "2 C.SD" SERIES
    • SLEWING RINGS 2CSD D.504
    • SLEWING RINGS 2CSD D.610
    • SLEWING RINGS 2CSD D.979
    • SLEWING RINGS "UN.D" SERIES
    • SLEWING RINGS UND D.400
    • SLEWING RINGS UND D.498
    • SLEWING RINGS UND D.700
    • SLEWING RINGS UND D.804
    • SLEWING RINGS UND D.880
    • SLEWING RINGS UND D.1000
    • SLEWING RINGS UND D.1095
    • SLEWING RINGS "2 UN.D" SERIES
    • SLEWING RINGS 2UND D.805
    • SLEWING RINGS 2UND D.880
    • SLEWING RINGS 2UND D.1000
    • SLEWING RINGS "U.DI" SERIES
    • SLEWING RINGS UDI D.498
    • SLEWING RINGS UDI D.700
    • SLEWING RINGS UDI D.804
    • SLEWING RINGS UDI D.880
    • SLEWING RINGS UDI D.1000
    • SLEWING RINGS UDI D.1095
    • SLEWING RINGS "2 U.DI" SERIES
    • SLEWING RINGS 2UDI D.805
    • SLEWING RINGS 2UDI D.880
    • SLEWING RINGS 2UDI D.1000
  • SLEWING RINGS
    • SLEWING RINGS "L" TYPE
    • SLEWING RINGS "M" TYPE
    • SLEWING RINGS "P" TYPE
    • SLEWING RINGS "LM/D" TYPE
    • SLEWING RINGS "ZN" TYPE
    • FITTING AND MAINTENANCE FOR TYPES L-M-ZN-ZD
    • SLEWING RINGS "ZD" TYPE
    • FITTING AND MAINTENANCE FOR TYPES I80-I90-VA/90
    • SLEWING RINGS "I80" TYPE
    • SLEWING RINGS "I80 G" TYPE
    • SLEWING RINGS "I90" TYPE
    • SLEWING RINGS "I90 G" TYPE
    • TOLLERANCE CHART
• HYDRAULIC CYLINDERS DIVISION
  • HYDRAULIC CYLINDERS FOR TRUCK MOUNTED CRANES
  • HYDRAULIC CYLINDERS FOR BUILDING MACHINERY
  • HYDRAULIC CYLINDERS COMPLETE WITH PUMP
  • HYDRAULIC CYLINDERS FOR AERIAL PLATFORMS
  • HYDRAULIC CYLINDERS FOR AGRICULTURAL MACHINERY
  • VARIOUS HYDRAULIC CYLINDERS
• COMMERCIAL DIVISION
  • CROWN-GEAR, AXLES, LEAF SPRINGS AND SEVERAL WHEELS
    • CROWN-GEAR AND PINIONS
    • CROWN-GEAR
    • TOOTHED PINION WITH HUB
    • TOOTHED PINION WITHOUT HUB
    • LEAF SPRINGS PARTS
    • LEAF SPRINGS WITH EYE/FLAT AND EYE/EYE
    • HELPER SPRING
    • PARABOLIC LEAF SPRING
    • CANTILEVER SPRINGS
    • CANTILEVER SUSPENSION WITH AXELS (BOGIES)
    • SPECIAL FIXING KITS FOR SPRINGS
    • SUNDRIES SOLUTIONS FOR SPRING SUSPENSIONS
    • SPRING DRAWBAR SUPPORT
    • CENTRAL FIXING KIT FOR CANTILEVER SPRING
    • LINKS NOT DRILLED
    • SLIDE SUPPORT WITH SHOE
    • EYE SUPPORT
    • PIN WITH SELFLOCKING NUT AND GREASING SCREW
    • SQUARE U BOLT FOR SPRING FIXING
    • CENTRAL DRILLED PLATE
    • AXLES
    • AXLES WITHOUT BRAKES
    • AXLES WITH BRAKES
    • STEERING AXLES WITHOUT BRAKES
    • STEERING AXLES WITH BRAKES
    • STUB AXLES WITHOUT BRAKES AND BRAKED STUB-AXLES
    • BRAKED AND UNBRAKED STEERING STUB-AXLES
    • WHEELS FOR AXLES
    • WHEEL NUT
    • ZINC-PLATED HUB CAP FOR STUB-AXLES
    • WHEELS FOR AGRICULTAR APPLICATION AND SMALL-TRAILERS
    • SOLID RUBBER WHEEL FOR STEERAGE HOES
    • COMPLETE PNEUMATIC TYPE FOR SIDE DELIVERY RAKES AND WINDROWERS
    • COMPLETE PNEUMATIC TYPE FOR SMALL TRAILERS WITH YOKE OR LATERAL CONNECTION
    • PNEUMATIC TYRE WITH 4 HOLES RIM
    • COMPLETE PNEUMATIC TYRE FOR BUGGY
    • COMPLETE PNEUMATIC TYRE FOR TRAILER AND AGRICULTURAL IMPLEMENT
    • COMPLETE PNEUMATIC TYRE FOR AGRICULTURAL IMPLEMENTS
    • COMPLETE PNEUMATIC TYRE FOR LOW LOADING TRAILERS
    • COMPLETE PNEUMATIC TYRE FOR HEAVY INDUSTRIAL TRAILERS
    • COMPLETE PNEUMATIC TYRE FOR DUMPER AND TANKTRAILERS
    • COMPLETE PNEUMATIC TYRE BUILDING CRANE AND TRAILERS
  • INDUSTRIAL AND AGRICULTURAL TRAILER PARTS
    • BRAKING-SYSTEMS PARTS
    • BRAKING - SYSTEMS AND WIRE PARTS
    • WINCHES
    • TRAILERS PARTS
  • TANK TRAILERS PARTS AND FARMYARD MANURE SPREADERS EQUIPMENT AND SPERE PARTS
    • TANK TRAILER PARTS
    • FARMYARD MANURE SPREADERS EQUIPMENT AND SPARE PARTS
    • SPRAYING AND CONNECTIONS
  • TRACTOR EQUIPMENT
    • SEATS
    • 3 POINT LINKAGE PARTS
    • ACCESSORIES FOR LUBRIFICATION AND GREASING
  • EQUIPMENT PARTS FOR PREPARATION OF LAND
    • EQUIPMENT PARTS FOR PREPARATION OF LAND
    • ROTARY PRUNING CRUSHERS ACCESSORIES
    • ROUND BALE LOADERS AND FORK LIFTS ACCESSORIES
  • HYDRAULIC PARTS
  • CARDAN SHAFTS PARTS
    • CARDAN SHAFTS PARTS
    • FITTINGS FOR POWER TAKE OFF
  • BLADE AND KNIVES
    • MOVERS BLEDE WIDE TYPE
    • MOVERS BLADE NARROW TYPE
    • MOVERS BLADE SPECIAL TYPE
    • HARVESTER THRESHERS
    • STRAIGH BLADES FOR ROTARY MOWERS
    • BENDED BLADES FOR ROTARY MOWERS
    • HELICOIDAL BLADES FOR ROTARY MOWERS
    • STRAW CHOPPER KNIVES FOR HARVESTER
    • STRAW CHOPPER KNIVES FOR HARVESTER
    • BENT BLADE FOR SILO UNLOADERS MILLER (WIDE TYPE)
    • BENT BLADE FOR SILO UNLOADERS MILLER (NARROW TYPE)
    • SLEEK ROUND BLADE D.95 WITH SQUARE HOLE FOR FEED MIXERS
    • TOOTHED ROUND BLADE D.95 FOR FEED MIXERS
    • TOOTHED BLADE SMALL TYPE FOR HORIZONTAL FEED MIXERS
    • TOOTHED BLADE GREAT TYPE FOR HORIZONTAL FEED MIXERS
    • TOOTHED BLADE RIGHT TYPE FOR HORIZONTAL FEED MIXERS
    • TOOTHED BLADE SEMICIRCLE WITHOUT HOLE FOR FEED MIXERS
    • SLEEK BLADE SEMICIRCLE FOR FEED MIXERS
    • TOOTHED RIGHT SIDE BLADE FOR VERTICAL FEED MIXERS
    • TOOTHED BENT BLADE "A" TYPE FOR VERTICAL FEED MIXERS
    • TOOTHED BENT BLADE "B" TYPE FOR VERTICAL FEED MIXERS
    • TOOTHED BENT BLADE "C" TYPE FOR VERTICAL FEED MIXERS
  • ELECTRICAL PARTS